Construction steps of Malijie concrete floor curing agent

1. Grassroots bare land treatment, depending on the ground conditions, first use 50-150 mesh metal or resin grinding discs to roughly grind the ground, clean the ground of oil stains, cement small pieces, white ash, etc., so that the ground is clean and reaches a certain level of flatness.

2. Polish and clean the floor further with a 150-300 mesh resin grinding disc, and thoroughly clean the dust on the floor with a vacuum cleaner or other tool, so that the ground pores can fully and evenly absorb the material.

3. Spray or apply liquid curing agent from Runfeng Company after the surface is dried during construction. After cleaning the substrate and feeding, it takes about 2-5 hours for a professional polishing machine to use resin grinding discs with 300-500 mesh to polish the ground.

4. Initial polishing: Use resin grinding discs with a grit of around 500-800 to continue polishing and cleaning the floor

5. After the initial polishing is completed, use resin grinding discs with a mesh size of 800-1000 or more to continue polishing, while also using relevant polishing materials to finely polish the ground and complete subsequent cleaning work.

Product Features

1. High cost-effectiveness, high-volume products

2. Significantly increase hardness and wear resistance

3. Sealed and dustproof

4. Environmental protection and safety

5. Glossiness improvement, brighter with use